Commercial Epoxy Flooring in Reno, Nevada
Reno's commercial floors take more punishment than residential ones. Forklifts and pallet jacks, rolling tool carts, hot tires from service drives, chemical spills in shop bays, foot traffic and food carts in retail and restaurant back-of-house. Commercial epoxy flooring and polyaspartic systems go in across Reno and Sparks for shops, showrooms, dealerships, fleet bays, light manufacturing, and small-format commercial space. The system is sized to the traffic and chemistry the floor actually sees, not just rolled out with a residential spec.

How much does commercial epoxy flooring cost?
Most shop, showroom and fleet bay floors in Reno run about $5 to $15 per square foot, depending on the traffic the floor sees. The work can be split into sections or done over a weekend so you don't have to close. The concrete is ground and repaired, then a thicker coating is built up to handle forklifts, rolling carts and spills. Each section can usually be back in use within 24 hours.
What A Commercial Epoxy System Actually Looks Like
The basic structure is the same as a residential garage floor: prepared concrete, base coat, optional decorative element, topcoat. The differences sit in the spec. Commercial floors are typically heavier build, often 20 to 60 mil total dry film thickness compared with 8 to 15 mil for a residential garage. The decorative element is often a broadcast quartz aggregate rather than vinyl flake, giving more slip resistance and impact tolerance. The topcoat is selected for the chemistry the floor will see. And the prep is more thorough because the consequences of a failed bond are bigger when forklift traffic is involved.
Reno Commercial Spaces We Coat
- Auto repair and tire shops across Reno and Sparks. Oil, brake fluid, transmission fluid, and impact loads.
- Dealership service drives and showrooms. Showroom-grade finishes for the customer-facing floor, harder spec for the back of house.
- Fleet maintenance bays. For city, county, and private fleet operations.
- Light manufacturing and assembly floors. Forklift-rated systems with appropriate slip resistance.
- Food and beverage back-of-house. Sealed, easy-to-clean floors with cove base where required by code.
- Dental, veterinary, and medical office floors. Sanitary, seamless surfaces.
- Fitness studios and gyms. Hard wearing under heavy equipment, easy to mop.
- Breweries and small-format production. Chemical-resistant systems with cove base detailing.
- Warehouse and distribution floors. High-traffic systems for forklift and pallet jack loads.
System Options By Use Case
| Use Case | Typical System | Why |
|---|---|---|
| Auto service bay | Diamond-ground prep, 100% solids epoxy base, broadcast quartz, polyaspartic topcoat | Heavy build, chemical resistance, impact tolerance |
| Showroom | Decorative flake or metallic over epoxy, polyaspartic topcoat | Customer-facing finish, lighter traffic |
| Fleet maintenance | Heavy-build epoxy with broadcast aggregate, chemical-resistant topcoat | Forklift loads, fluid exposure |
| Food and beverage back-of-house | USDA-compliant urethane mortar or epoxy with cove base | Sanitation and code compliance |
| Brewery production floor | Urethane mortar with chemical-resistant topcoat | Hot water, organic acids, sustained wet conditions |
| Gym and studio | Decorative epoxy with broadcast quartz | Impact and equipment traffic, slip resistance |
| Light warehouse | Solid color epoxy with polyaspartic topcoat | Visibility, durability, cost balance |
Scheduling Commercial Installs Around Operations
Most Reno commercial customers cannot shut the whole space down for a multi-day install. We work around that. The two common approaches are phased installs (we do half the floor while you work on the other half, then swap) and weekend or overnight installs (we work Saturday night through Sunday afternoon and you reopen Monday). Polyaspartic chemistry is what makes both possible because it shortens cure times enough to fit inside a real operating schedule. We will quote both approaches and let you pick which one fits your operation.
Commercial Flooring FAQs
Related Services And Cities
- Residential epoxy garage floor coating
- Concrete floor repair for damaged commercial slabs
- Floor recoating for failing commercial coatings
- Commercial floors Sparks NV
- Commercial floors Fernley NV
- Commercial floors Carson City NV
- How long a commercial install takes
Get A Free Commercial Floor Estimate In Reno
Call (775) 451-2816 - Mon-Sat 7AM-6PM. We work around your operating schedule.